BLACK STEEL Peg (Trick Axles) Set
The Black Steel BMX Pegs are suitable for every ramp. They have a slight knurling that allows you to grind optimally, but still have a good grip with your shoe. Since many BMX bikes are equipped with 14mm axles in the back and 10mm in the front we offer a complete peg set.
Data at a glance:
- With internal thread
- Fits 14mm rear axles & 10mm (3/8") front axles
- Very easy mounting.
- Screws directly onto the axle
- Peg replaces the wheel nut - therefore higher stability
- Scope of purchase: 1 pair 14mm pegs + 1 pair 10mm (3/8" 26TPI standard BMX thread) pegs
- Due to the knurling the rider has an optimal grip
| Colour: | Black |
|---|---|
| Height: | 1.5" / 3,8cm |
| Length: | 4.33" / 110mm |
| Material: | HiTen steel |
| Weight: | 14.99 oz / 425g/Paar |
| Width: | 3.8" |
Product Safety Instructions for BMX Peg Set KHE BLACK STEEL 2 Pairs 14mm and 10mm (3/8"):
Compatible Pegs: Ensure that the pegs fit the axles and the BMX bike (diameter and length) and are suitable for the intended riding style (Street, Park, Flatland).
Secure Installation: Regularly check that the pegs are securely mounted on the axles. Loose pegs can slip or fall off, leading to accidents.
Correct Axle Length: The axles must be long enough to securely hold the pegs without excessively straining the thread. The axle must be long enough for the complete thread of the peg to be fully screwed onto the axle.
Injury Prevention: Pegs should have no sharp edges to prevent injuries to legs or feet during stunts.
Regular Maintenance: Regularly check the axles and screws for wear, and tighten the pegs if needed. Inspect the pegs regularly for rust spots and material weaknesses. Cracks and rust can compromise the stability of the steel. Replace damaged pegs immediately.
KHE GmbH & Co. KG
Am Hambiegel 3
76706 Dettenheim
Germany
service@khebikes.de
Login