US$11.95*
Available, delivery time: 5-15 business days **
KHE AFFIX aluminium Topbolt for 1-1/8" steerer tubes with a M25 thread.
Replacement topbolt for BMX bikes with an Affix 360° rotor. The topbolt is also compatible with any 1-1/8" x M25 steerer tube.
Each fork must be countered at the end of the steerer tube with a clevis screw. This clevis screw fits 1 1/8" inch steerer with an M25 female thread. Thanks to the hollow screw, it offers optimal space for a front brake cable, which is guided through the steerer tube.
- Inside with 6 cant allen
- Oblong hole for front cable
- Center hole with thread for AFFIX rotor
| Colour: | Black |
|---|---|
| For fork: | 1 1/8" |
| Material: | 7005 Aluminum |
| Weight: | 0.35 oz / 10g |
Product Safety Instructions for the Bike Top Cap (Headset Cap):
Correct Top Cap: Ensure that the top cap fits the size of the steerer tube (usually 1 1/8 inches) and the stem being used.
Secure Attachment: Tighten the top cap screw evenly and securely to properly preload the headset without locking the fork.
Material Quality: Choose a top cap made from sturdy, corrosion-resistant materials such as aluminum or steel to prevent breakage or deformation.
Regular Inspection: Regularly check that the top cap is securely in place and shows no signs of cracks or wear.
Correct Function: The top cap is only for adjusting headset preload, not for clamping the stem. Stem fixing is done with the stem bolts.
Stem Adjustment: Make sure the top cap is properly installed before tightening the stem bolts to evenly preload the headset.
Post-Crash Check: After a crash, inspect the top cap and its screw for damage and replace them if necessary.
Dirt and Water Protection: The top cap protects the steerer tube from dirt and moisture. Ensure it is tightly and cleanly installed.
Visual Inspection: Use top caps without sharp edges or loose parts to avoid injuries or damage to the headset.
KHE GmbH & Co. KG
Am Hambiegel 3
76706 Dettenheim
Germany
service@khebikes.de
Login