MTB Fixie Aluminum Pedals M-WAVE 2AL 9/16 Inch Plain Bearings
With its aluminum body and PVC outer surface, this pedal is particularly light & stable. Thanks to the anti-slip surface & reflectors, this pedal carries the German test number and is approved according to StVZO. The 9/16" stable boron axle and high-quality polymer plain bearings also ensure a pleasant pedaling feel. These pedals are very light at just 294g.
Overview of data:
- Aluminum body
- Boron axle
- with high-quality polymer plain bearings
- with German test mark
- with non-slip rubber surface
- with reflectors
- Pedal surface: 72.5 x 92 mm (L x W)
- Mounting also possible with hex key
| Axle diameter: | 9/16 Zoll |
|---|---|
| Colour: | Black |
| Length: | 28.54" / 72,5cm |
| Material: | Aluminum, plastic |
| Weight: | 10.37 oz / 294g |
| Width: | 3.62 " / 92 mm |
Ensure Compatibility:
These aluminum pedals are designed exclusively for use on MTB/Fixie bicycles. They are not suitable for other bicycle types or mechanical applications.
Installation: The pedals are marked with a left-hand thread (L) and a right-hand thread (R). Install each pedal on the corresponding side of the bicycle. Tighten the pedals using a torque wrench: 35–40 Nm. Apply a small amount of lubricant to the threads and check after installation that the pedals rotate freely without resistance.
Care and Maintenance:
Clean the pedals regularly with a damp cloth to remove dirt, mud, or dust that may affect their performance.
Inspect the pedal bearings and axle regularly for play or wear. If necessary, lubricate the bearings with suitable grease.
Replace When Worn: Replace the pedals immediately if you notice wear, uneven degradation, cracks, or damage.
Am Hambiegel 3
76706 Dettenheim
Germany
service@khebikes.de
Login