MTB Fixie Aluminum Pedals Prism 9/16 Inch Ball Bearings
With its aluminum body and steel cage, this pedal is particularly light and stable. Thanks to the reflectors, this pedal carries the German test number and is approved according to StVZO. These classic pedals have a retro look that perfectly matches fixie bikes or racing bikes. The 9/16" stable steel axle and the smooth-running ball bearings also ensure a pleasant pedaling experience. These pedals are very light at just 332g.
Overview of data:
- Brand: PRISM
- Dimensions: 95 x 60mm
- Height: 25mm
- Material: Aluminum body / Steel cage
- Axle Material: Steel Boron
- Thread size: 9/16" inch
- Ball bearings
- Weight: only 332g (pair)
- Suitable for 3-piece cranks
| Axle diameter: | 9/16 Zoll |
|---|---|
| Colour: | Black |
| Length: | 60mm |
| Material: | Aluminum |
| Weight: | 11.71 oz / 332 g |
| Width: | 3.74" / 95 mm |
Ensure Compatibility:
These aluminum pedals are designed exclusively for use on MTB/Fixie bicycles. They are not suitable for other bicycle types or mechanical applications.
Installation: The pedals are marked with a left-hand thread (L) and a right-hand thread (R). Install each pedal on the corresponding side of the bicycle. Tighten the pedals using a torque wrench: 35–40 Nm. Apply a small amount of lubricant to the threads and check after installation that the pedals rotate freely without resistance.
Care and Maintenance:
Clean the pedals regularly with a damp cloth to remove dirt, mud, or dust that may affect their performance.
Inspect the pedal bearings and axle regularly for play or wear. If necessary, lubricate the bearings with suitable grease.
Replace When Worn: Replace the pedals immediately if you notice wear, uneven degradation, cracks, or damage.
Am Hambiegel 3
76706 Dettenheim
Germany
service@khebikes.de
Login