**BMX Chain KMC Z1 Wide Gold Single-Speed / Internally Geared Hub Chain**
The KMC Z1 Wide Gold single-speed bicycle chain combines a durable heavy-duty construction, secure No-Drop inner plates and a gold-coloured brass coating for high strength, reliable chain retention and long-lasting performance on BMX, fixie and city bikes.
Accessories
KMC Z1 Wide Gold Singlespeed Chain
The KMC Z1 Wide Gold is a robust singlespeed chain for BMX, Fixie, city bikes, and hub gear drivetrains. Its heavy-duty construction with reinforced links and high pin strength delivers reliable power transfer under higher loads, ideal for daily riding and simple chain setups.
With 1/2" pitch and 1/8" inner width, this bicycle chain fits wide singlespeed systems. The No-Drop inner plate helps prevent chain derailment for smoother running. It includes 112 links, 8.6 mm outer width, and a gold brass-coated finish. Non-directional installation and a KMC Snap-On master link ensure quick, secure assembly.
Produkthighlights
- Heavy-duty link design, high pin strength
- 1/2" x 1/8" wide drivetrain compatibility
- No-Drop inner plates, reduced derailment risk
- 112 links, 8.6 mm outer width
- Gold brass coating, durable premium look
| Size: | 1/2" x 1/8" |
|---|---|
| Colour: | Gold |
| Length: | 112 Links |
Intended use: Bicycle chain for compatible singlespeed drivetrains and bicycles with hub gears, particularly BMX, fixie and city bikes. The chain has a pitch of 1/2", an inner width of 1/8", an outer width of 8.6 mm and 112 links. Before installation, ensure that the chain, chainring and sprocket are compatible in pitch, width and design. The chain is non-directional. The heavy-duty construction and No-Drop inner plates do not replace correct installation and regular safety inspections.
Installation / use: Shorten the chain to the required length using a suitable chain tool and install the included KMC Snap-On connecting link according to the manufacturer's instructions. Use only compatible connecting links and ensure that the connection is fully engaged. After installation, check the correct chain tension, straight chainline and secure fitting of the connecting link. The chain must be neither too tight nor too loose. Before every ride, inspect chain tension, chain movement, chainrings, sprockets and the connecting link. Carry out additional inspections after jumps, hard landings or intensive BMX riding. Never reach into the chain or other moving components while the drivetrain is operating.
Care and cleaning: Regularly remove dirt and deposits from the chain and lubricate it with a suitable bicycle chain lubricant. Do not use aggressive cleaning agents, solvents or high-pressure cleaners to avoid damaging the brass-plated surface. Regularly inspect chain links, pins and the Snap-On connecting link for wear, corrosion, damage and unusual movement. Check chain tension and elongation regularly, particularly during BMX riding and under high loads.
Replacement due to wear: Replace the chain if excessive elongation, damaged or stiff links, loose or damaged pins, cracks, deformation or other safety-related defects are detected. Replace a damaged, deformed or insecure Snap-On connecting link according to the manufacturer's instructions. A damaged, incorrectly tensioned or improperly installed chain may break or derail, resulting in loss of control, falls and injury.
Am Hambiegel 3
76706 Dettenheim
Germany
service@khebikes.de
Login