BMX chain KHE PYC Halflink Hollow – black
The KHE PYC Halflink BMX chain combines 86 half-links, lightweight mushroomed hollow pins and a durable construction for high strength, precise chain tension adjustment and reliable performance in street, park and grind riding.
Accessories
KHE PYC Halflink BMX Chain for Street & Park
The KHE PYC Halflink BMX chain is built for high loads in street and park riding. With the classic 1/2" x 1/8" BMX size and 86 links, it delivers reliable power transfer for BMX and single speed setups.
Its halflink design allows ultra-fine chain length adjustment by removing single links, helping you position the rear wheel precisely and set ideal tension. Overlapping links improve protection during grinds, while lightweight, strong mushroom hollow pins keep weight low at about 348 g.
Produkthighlights
- Halflink construction for precise tensioning
- 86 links, BMX 1/2" x 1/8"
- Overlapping links protect during grinds
- Mushroom hollow pins, light and strong
- Approx. 348 g for low weight
| Material: | HiTen steel |
|---|---|
| Size: | 1/2" x 1/8" |
| Colour: | Black |
| Weight: | 12.28 oz / 348g |
| Length: | 86 Links |
Intended use: Halflink bicycle chain for compatible BMX and single-speed drivetrains, particularly for Street and Park riding. The chain has a standard size of 1/2" x 1/8" and 86 links. Before installation, ensure that the chain, chainring and sprocket are compatible in pitch, width and design. The Halflink construction allows precise adjustment of the chain length.
Installation / use: Install the chain correctly and adjust it to the required length. Use only suitable chain tools and connecting methods when shortening or joining the chain. Ensure that the mushroom-style hollow pins are correctly positioned and securely fitted. After installation, check chain tension, chain alignment, secure connection and smooth drivetrain operation. The chain must not be too tight or too loose. Before every ride, inspect for damaged links, loose pins and unusual noises. Never reach into the moving chain or other moving drivetrain components.
Care and cleaning: Regularly remove dirt and deposits from the chain and lubricate it with a suitable bicycle chain lubricant. Do not use aggressive cleaning agents or solvents. Especially after grinding on rails and curbs, jumping or hard landings, inspect the overlapping chain links, hollow pins, chain alignment and tension for wear or damage.
Replacement due to wear: Replace the chain immediately if excessive elongation, damaged or stiff links, loose or damaged hollow pins, cracks, deformation or other safety-related defects are detected. A damaged or incorrectly installed chain may break or derail, resulting in loss of control and injury.
Am Hambiegel 3
76706 Dettenheim
Germany
service@khebikes.de
Login