18 inch BMX rear wheel with freecoaster
This 18 inch BMX rear wheel pairs the KHE Greyhound Freecoaster hub with the KHE MVP DD rim for smooth fakie control and durable street riding. Built for riders who want a reliable freecoaster setup with precise engagement and a clean, responsive feel.
The hub features a 14 mm (0.55 inch) 4130 CrMo axle, a 9-tooth driver (RHD), adjustable freecoaster slack, and sealed industrial bearings. The KHE MVP DD double-wall rim uses 6061 T6 aluminum with 36 holes, delivering strength for park, street, and flatland BMX builds.
Product highlights
- KHE Greyhound Freecoaster hub control
- Adjustable slack for fakie tricks
- 14 mm (0.55 inch) CrMo axle
- Sealed industrial bearings, low maintenance
- KHE MVP DD 6061 T6 rim
| Rim: | KHE DD 18 inch double chamber aluminum, 36 hole |
|---|---|
| Material: | 4130 CrMo, 7005 Aluminum |
| Tire size: | 18 inch |
| Colour: | Black |
| Weight: | 1088g |
| Axis length: | 6.69" / 170mm |
| Rim width: | 1.38" / 35mm |
| Number of holes: | 36H |
| Teeth: | 9T |
Intended use: BMX rear wheel for compatible 18-inch BMX bicycles with 14 mm dropouts. Suitable for street, park and flatland riding. Do not use on other vehicles or incompatible frames.
Installation / use: Install the rear wheel correctly and tighten the axle nuts to the specified torque. Before every ride, check the axle fastening, spoke tension, rim, tyre, freecoaster function and bearing operation. Do not use the wheel if spokes, rim or axle are damaged.
Care and cleaning: Clean the wheel regularly with water and a soft cloth. Do not use aggressive cleaning agents or pressure washers. Inspect and maintain the bearings and freecoaster mechanism regularly.
Replacement due to wear: Replace the wheel immediately if cracks, severe deformation, damaged bearings, loose spokes or any other safety-related defects are found. A damaged wheel may cause loss of control and serious injury.
Am Hambiegel 3
76706 Dettenheim
Germany
service@khebikes.de
Login