KENDA bicycle inner tube 20 inch with FV (French valve)
Highly elastic special BUTYL compound. Double final inspection for air tightness. According to the test in Mountain bike: “Best rolling resistance in the standard category, also with good puncture protection”. Perfect for thicker tires.
- 20 inch tube for all wheel types.
- Width 2.40 - 2.80 / 61/71-406
- with valve FV/Sclaverand/Presta
- ETRTO size 406mm
- ETRTO tube width 61/71mm
- Wall thickness 1mm
- Valve 48mm
- high quality BUTYL rubber compound
| Colour: | Black |
|---|---|
| Material: | rubber |
| Tire size: | 20 inch |
| Valve type: | Sclaverandventil/Französisches Ventil |
Ensure Compatibility:
The bicycle tube should only be used for the intended wheel sizes and tire pressures.
Installation Instructions:
When mounting, ensure that the tube is correctly seated in the tire and is not twisted.
Position the valve correctly to avoid damage when inflating.
Also, ensure an even distribution of the tube in the tire to prevent pressure points and resulting damage.
Operating Instructions: Do not exceed the recommended tire pressure range, as this can cause the tube to burst. After strong impacts (e.g., potholes), inspect the tube for possible damage.
Warning Instructions:
Do not use a damaged or worn tube.
High temperatures, such as those caused by extreme sunlight or in vehicles during summer, damage the tube and can cause it to burst.
Replace When Worn: Regularly check the tube for wear or damage. In case of wear, uneven abrasion, cracks, or damage, replace the tube immediately.
Am Hambiegel 3
76706 Dettenheim
Germany
service@khebikes.de
Login
Accessories
