KENDA bicycle inner tube 24 inch x 2.3 -2.6 inch with AV (auto valve)
Highly elastic special BUTYL compound. Double final inspection for air tightness. According to the test in Mountain bike: “Best rolling resistance in the standard category, also with good puncture protection”. Perfect for thicker tires.
- 24 inch tube for all wheel types.
- Width 2.30 - 2.60 / 56/58/62-507
- with autovalve (AV/Schrader/American)
- ETRTO size 507mm
- ETRTO tube width 56/62mm
- Wall thickness 1mm
- valve 35mm
- high quality BUTYL rubber compound
Colour: | Black |
---|---|
Material: | rubber |
Tire size: | 24 inch |
Valve type: | Schrader / Auto valve |
Proper Size: Only use tubes that match the size and width of your tires and rims.
Observe Tire Pressure: Maintain the air pressure recommended by the tube and tire manufacturer to avoid damage and punctures.
Careful Installation: When installing, make sure the tube is placed evenly inside the tire and not pinched to prevent blowouts.
Check Tire and Rim: Before installation, check that the tire and rim are free of foreign objects or sharp edges to avoid damaging the tube.
Valve Condition: Check that the valve is airtight and securely attached to prevent pressure loss. Use the correct valve type (Schrader/Auto, Presta, or Dunlop) for your rim.
Repair Kit: Always carry a repair kit with you to temporarily patch the tube in case of a puncture. Also available in our program.
Aging and Wear: Even if the tube appears to be in good condition, the material can become brittle with age. Replace tubes regularly, especially after long periods of storage.
No Overstretching: Only inflate the tube once it is installed to avoid overstretching and potential blowouts.
Material: Rubber
KHE GmbH & Co. KG
Am Hambiegel 3
76706 Dettenheim
Germany
service@khebikes.de
Login