KENDA 26 x 1.9 - 2.125 Inch Ultralite Tube with FV (French Valve)
Very lightweight KENDA quality tube with a wall thickness of just 0.6mm. The lightweight design is especially noticeable at higher speeds due to the reduced rotating mass.
- Tire Size: 26 inches for all wheel types
- Width: 1.9 - 2.125 inches 47/57-559
- Valve Type: FV/Sclaverand/Presta
- ETRTO Size: 559mm
- Wall Thickness: 0.6mm
- High-quality Rubber Mix
| Material: | rubber |
|---|---|
| Tire size: | 26 inch |
| Colour: | Black |
| Weight: | 4.06 oz / 115g |
| Product group: | Bicycle tubes |
| Valve type: | Sclaverand/ French valve |
Ensure Compatibility:
The bicycle tube should only be used for the intended wheel sizes and tire pressures.
Installation Instructions:
When mounting, ensure that the tube is correctly seated in the tire and is not twisted.
Position the valve correctly to avoid damage when inflating.
Also, ensure an even distribution of the tube in the tire to prevent pressure points and resulting damage.
Operating Instructions: Do not exceed the recommended tire pressure range, as this can cause the tube to burst. After strong impacts (e.g., potholes), inspect the tube for possible damage.
Warning Instructions:
Do not use a damaged or worn tube.
High temperatures, such as those caused by extreme sunlight or in vehicles during summer, damage the tube and can cause it to burst.
Replace When Worn: Regularly check the tube for wear or damage. In case of wear, uneven abrasion, cracks, or damage, replace the tube immediately.
Am Hambiegel 3
76706 Dettenheim
Germany
service@khebikes.de
Login
Accessories
