KHE BETO damper pump
The KHE BETO shock pump offers precise pressure control up to 400 psi, an easy-to-read pressure gauge and controlled air release – ideal for accurately setting up air suspension forks and shocks.
KHE BETO Shock Pump for Air Suspension
The KHE BETO shock pump is engineered for accurate inflation of air suspension forks and rear shocks. Its high-grade aluminum body keeps weight low at 146 g while maintaining rigidity. With up to 28 bar / 400 psi, this high-pressure pump fits most air-spring components using a Schrader valve.
A clear performance gauge enables precise pressure checks, and the controlled air-release valve supports fine tuning for suspension setup. The flexible hose simplifies access to recessed valves and allows installation and removal without pressure loss. At 260 mm length and 11 cc per stroke, it delivers efficient, repeatable adjustments for MTB and trail bikes.
Produkthighlights
- Up to 28 bar / 400 psi
- Aluminum housing, only 146 g
- Readable gauge for exact pressure control
- Controlled bleed valve for micro-adjustments
- Flexible hose, no-loss valve connection
| Material: | Aluminum |
|---|---|
| Colour: | Silver |
| Weight: | 5.15 oz / 146g |
Intended use: Shock pump for inflating compatible air suspension forks and rear shocks with AV/Schrader valves. The pump is designed for a maximum pressure of 28 bar / 400 psi. Do not use for unsuitable pressure systems or other applications.
Installation / use: Connect the pump securely to the valve before inflation and ensure a correct fit. Never exceed the maximum permitted pressure of the respective suspension component. Build pressure slowly and in a controlled manner and use the air release function for fine adjustment if necessary. Do not use a damaged or leaking pump.
Care and cleaning: Clean the shock pump regularly with a soft, slightly damp cloth. Do not use aggressive cleaning agents or solvents. Regularly inspect the hose, valve connector, seals and pressure gauge for wear or damage.
Replacement due to wear: Do not continue using the pump if cracks, a damaged hose, defective valve connector, leaks or a faulty pressure gauge are present. Worn or damaged components must be replaced before further use.
Am Hambiegel 3
76706 Dettenheim
Germany
service@khebikes.de
Login